Price
Note :
Net, ex works, excluding VAT
Article codes, product groups & Status information
|
Model article-code
|
HO 10K
|
|
Model-Serie
|
HO
|
|
Assortment
|
Sauter
|
|
Product Type
|
Hardness measurement
|
|
Product group
|
Hardness testers (UCI)
|
|
Product usage type
|
Main article
|
|
EAN code (Model)
|
4045761200678
|
|
Planned start date
|
2017-1HJ
|
|
Sales Clearance
|
yes
|
|
Customs tariff number
|
90248000
|
|
Article Status
|
active
|
|
PGS-ID
|
PGS-3-4-3
|
|
CE Label
|
yes
|
|
Country of Origin
|
CN
|
Technical data - Primary
|
Measuring range Rockwell - scale A
|
61-85,6HRA
|
|
Measuring range Rockwell - scale B
|
41-100HRB
|
|
Measuring range Rockwell - scale C
|
20,3-68HRC
|
Technical data - Construction
|
Dimension housing (W×D×H)
|
28×83×160 mm
|
|
Material housing
|
coated metal
|
Technical data - Display
Technical data - Power supply
|
Power supply
|
Battery & Power supply
|
|
Battery type
|
Li-Ion
|
|
Input voltage power supply / max. voltage
|
110 - 240 V
|
|
Power socket for power supply unit
|
Micro-USB
|
|
Mains adapter/adapter included
|
EURO
|
|
Protection Class
|
no protection class
|
Technical data - Measuring system
|
Measuring range Vickers
|
80-1599HV
|
|
Measuring range Brinell
|
79-618HB
|
|
Measuring range tensile strength
|
255-2180MPa
|
|
Hardness scales
|
HV 10
|
|
Test force Hardness measurement
|
100 N
|
|
Units
|
HB;HL;HRA;HRB;HRC;HV;MPa
|
|
Test item - weight - minimum
|
300 g
|
|
Measuring probe - length
|
15,5 cm
|
|
Measuring probe - diameter
|
18 mm
|
Technical data - Functions
|
Statistic-Function
|
yes
|
|
Averaging
|
yes
|
|
Auto-Off
|
30 min
|
|
Limit value (Min - Max)
|
yes
|
|
Audible ready signal
|
yes
|
|
Optical ready signal
|
yes
|
|
360° Measuring
|
yes
|
|
Interfaces
|
USB-Device
|
Technical data - Packing & Shipping
|
Dimensions packaging (W×D×H)
|
395×325×150 mm
|
|
Gross weight
|
4.4 kg
|
|
Net weight
|
0.90 kg
|
|
Shipping method
|
Parcel service
|
|
UN number
|
Li-Ion, packed with device (UN 3481, Packing Instruction #7, Lithium ion batteries in compliance with Section II of PI 967)
|
|
Packaging component - by weight - cardboard
|
1755.5 g
|
|
Packaging component - by weight - styrofoam
|
1755.5 g
|
|
Delivery time
|
1 d
|
Technical data - Counting data
|
Memory
|
yes
|
|
Memory - Number of results
|
1.000
|
Text data
|
Headline
|
Mobile Ultrasound Hardness Testing Device SAUTER HO 10K
|
|
Slogan
|
Premium UCI hardness testing device for Rockwell, Brinell and Vickers
|
|
Description
|
- Application: This ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results
- Principle: The SAUTER HO measures by using a vibrating rod which vibrates at ultrasonic frequency and is pressed onto the sample at a defined test force. At the lower end there is a Vickers indenter. Its resonant frequency increases, as soon as an indentation is created when it comes into contact with the sample. Through appropriate adjustment of the device, the resulting change in resonant frequency is matched with the corresponding Vickers hardness
- Examples: The SAUTER HO ultrasound hardness testing system is primarily used for measuring small forgings, castings, welding points, punched parts, casting tools, ball bearings and the flanks of gear wheels as well as for measuring the influence of warmth or heat
- Advantages compared with Rockwell and Brinell: Almost non-destructive testing by smaller test force and thus only microscopic indentation craters
- Advantages compared with Vickers: Demanding optical measuring is not required. You can therefore carry out measurements directly on-site, for example, on a permanently installed workpiece
- Advantages compared with Leeb: The high requirements concerning the proper weight of the test object can be widely omitted
- Standards: The device meets following technical standards: DIN 50159-1; ASTM-A1038-2005; JB/T9377-2013
- Measurement data memory saves up to 1000 measurement groups each with 20 individual values
- Mini statistics function: Display of the measuring result, the number of measurements, the maximum and minimum value as well as the average value and the standard deviation
- Calibration: The device can be set to both standard hardness test blocks as well as to up to 20 reference calibration values. When doing this it is possible to measure different materials quickly, without having to re-adjust the device to the individual materials
- Scope of delivery: Standard block for calibration (approx. 61 HRC), USB cable, display unit, UCI sensor unit, transport case, protective case (turquoise), further accessories
|
Responsible Persons
|
Product manager
|
Dietmar Paul
|
Prices & Discounts
|
List price
|
5200.00 €
|
|
Warranty
|
36 mon
|
Optional Services
|
Factory calibration
|
961-270
|
